Safety Recalls, Product Recall Notices, Dangerous Products, Consumer Product Safety Recalls

from Accident Lawyer Hawaii - Defective Products Claims - Product Liability Attorney William H. Lawson


Home > Indoor Furniture & Fixtures > Lamps
FOR IMMEDIATE RELEASE  
December 12, 1975  
Release # 75-072

CPSC And Woods Wire Products, Inc. Warn Of Severe Shock Hazard

WASHINGTON, D.C. -- The U.S. Consumer Product Safety Commission and Woods Wire Products, Inc. today announced that some 40,000 clamp-on lamps with metal reflectors, manufactured during 1970 and 1971 by Woods Wire Products, Inc. may pose an imminent danger of severe electric shock. When the lamp is plugged in, the metal spring protecting the cord from strain at the base of the bulb socket cap may become electrically "hot," thus creating a shock hazard.

Most of the lamps were sold in retail stores between April 1970 and December 1971 for approximately $3.00. Some may still be available. Retailers are being notified. The lamp consists of a bulb socket attached to a bowl-shaped metal reflector and to a clamp capable of gripping the edge of a door, table top, or other item of furniture. Such lamps are used for a variety of purposes requiring extra illumination.

Consumers can determine whether theirs is one of the potentially defective lamps by DISCONNECTING THE LAMP from the electrical outlet and examining it as follows:

The lamp will have a metal spring at the base of the socket, surrounding the power cord and extending into the base of the bulb socket cap. The wire usually has a black vinyl covering, with the trademark "INDUSTRO R" and "300 Volts" printed in white letters. These two characteristics will identify the lamp, but consumers should be aware that the metal spring is the primary identifier.

After DISCONNECTING and identifying the lamp, consumers should separate the socket cap from the assembly and examine the inside of the socket. If there is a cardboard disc between the spring and the socket assembly, the lamp does not present the potential hazard. However, if there is no such insulator disc, the consumer should call the manufacturer Woods Wire Products, Inc. toll free at 800/428-9511 (In Indiana call collect at 317/844-7262) to receive instructions on how to return the potentially defective socket assembly to the manufacturer. All postage will be paid by the manufacturer.




Notice and Disclaimer: The information provided in these pages is preliminary and informational only. No liability is offered or assumed for inaccuracies in this information. Please check with the federal Consumer Product Safety Commission to confirm the completeness of all information provided.
Privacy Policy: This website does not collect any personally identifiable information about its visitors. No cookies nor downloaded files are sent to our users. If you have any questions or you wish to contact us about this site- please email us at the email address found on our sponsor's website.
Copyright © 2005-2019: by Accident Lawyer Hawaii - Construction Accident Lawyer Honolulu HI William H. Lawson



Please support our sponsors. The information on these pages is primarily brought to you by the following sponsors:
Automotive Safety Recalls - Unsafe Vehicles and Auto Parts - Hawaii Spinal Cord Injury Lawyer - SCI Attorney Honolulu - Hawaii Elevator Accident Lawyer - Escalator Accident Attorney Honolulu - Hawaii Truck Accident Attorney - Bus Accident Lawyer Honolulu - Hawaii Drowning Lawyer - Diving and Swimming Pool Accident Attorney Honolulu - Hawaii Brain Injury Lawyer - Hawaii - Brain Injury Attorney Honolulu - Hawaii Wrongful Death Lawyer - Hawaii - Wrongful Death Attorney Honolulu - Hawaii Motorcycle Accident Attorney - Motorbike Accident Lawyer Hawaii - Hawaii Drunk Driver Personal Injury Lawyer - Drugs, Texting and Drunk Driving - Hawaii Accident Investigation - Hawaii Claim Investigator